C Series

ID Description Mem. Non-M.
C101/1993 Joint Venture Agreement for Professional Services (1993) REPLACES C801
Intended to be used by two or more parties to provide for their mutual rights and obligations in forming a joint venture. It is intended that the joint venture, once established, will enter into an agreement with the owner to provide professional services. The parties may be all architects, all engineers, a combination of architects and engineers, or another combination of professionals. The document provides a choice between two methods of joint venture operation. The “Division of Compensation” method assumes that services provided and the compensation received will be divided among the parties in the proportions agreed to at the outset of the project. Each party’s profitability is then dependent on individual performance of pre-assigned tasks and is not directly tied to that of the other parties. The “Division of Profit and Loss” method is based on each party performing work and billing the joint venture at cost plus a nominal amount for overhead. The ultimate profit or loss of the joint venture is divided between or among the parties at completion of the project, based on their respective interests. C101–1993 was renumbered only in 2007; its content remains the same as in C801–1993.
$20.99 $24.99
C106/2007 Digital Data Licensing Agreement (2007)
Serves as a licensing agreement between two parties who otherwise have no existing licensing agreement for the use and transmission of digital data, including instruments of service. C106–2007 defines digital data as information, communications, drawings, or designs created or stored for a specific project in digital form. C106–2007 allows one party to (1) grant another party a limited non-exclusive license to use digital data on a specific project, (2) set forth procedures for transmitting the digital data, and (3) place restrictions on the license granted. In addition, C106–2007 allows the party transmitting digital data to collect a licensing fee for the recipient’s use of the digital data.
$15.99 $19.99
C132/2009 Standard Form of Agreement Between Owner and Construction Manager as AdviserAIA Document C132™–2009 provides the agreement between the owner and the construction manager, a single entity who is separate and independent from the architect and the contractor, and who acts solely as an adviser (CMa) to the owner throughout the course of the project. AIA Document C132–2009 is coordinated for use with AIA Document B132™–2009, Standard Form of Agreement Between Owner and Architect, Construction Manager as Adviser Edition.Both C132–2009 and B132–2009 are based on the premise that there will be a separate construction contractor or multiple prime contractors whose contract(s) with the owner will be jointly administered by the architect and the construction manager under AIA Document A232™–2009. AIA Document C132–2009 is not coordinated with, and should not be used with, documents where the construction manager acts as the constructor for the project, such as in AIA Document A133™–2009 or A134™–2009. NOTE: C132–2009 replaces AIA Document B801™CMa–1992, which expires on December 31, 2010. $15.99 $19.99
C191/2009 Standard Form Multi-Party Agreement for Integrated Project Delivery
AIA Document C191™–2009 is a standard form multi-party agreement through which the owner, architect, contractor, and perhaps other key project participants execute a single agreement for the design, construction and commissioning of a Project. AIA Document C191–2008 provides the framework for a collaborative environment in which the parties operate in furtherance of cost and performance goals that the parties jointly establish. The non-owner parties are compensated on a cost-of-the-work basis. The compensation model is also goal-oriented, and provides incentives for collaboration in design and construction of the project. Primary management of the project is the responsibility of the Project Management Team, comprised of one representative from each of the parties. The Project Executive Team, also comprised of one representative from each of the parties, provides a second level of project oversight and issue resolution. The conflict resolution process is intended to foster quick and effective resolution of problems as they arise. This collaborative process has the potential to result in a high quality project for the owner, and substantial monetary and intangible rewards for the other parties.
$15.99 $19.99
C195/2008 Standard Form of Single Purpose Entity Agreement for Integrated Project Delivery (2008)
AIA Document C195–2008 is a standard form Single Purpose Entity Agreement through which the owner, architect, construction manager, and perhaps other key project participants, each become members of a limited liability company (“the Company”). The sole purpose of the Company is to design and construct a project utilizing the principles of Integrated Project Delivery established in Integrated Project Delivery: A Guide. C195–2008 provides the framework for a collaborative environment in which the Company operates in furtherance of cost and performance goals that the members jointly establish. To obtain project funding, the company enters into a separate agreement with the owner. To design and construct the project, the Company enters into separate agreements with the architect, construction manager, other non-owner members, and with non-member consultants and contractors. The compensation model in the non-owner member agreements is goal-oriented and provides incentives for collaboration in design and construction of the project, and for the quick and effective resolution of problems as they arise. This highly collaborative process has the potential to result in a high quality project for the owner, and substantial monetary and intangible rewards for the other members. The AIA will publish standard form agreements for use between the Company and its members in November, 2008. In the interim, users of C195–2008 should consult an attorney to develop those agreements and coordinate their content with C195–2008.
$15.99 $19.99
C196/2008 Standard Form of Agreement Between Single Purpose Entity and Owner for Integrated Project Delivery (2008)
AIA Document C196–2008 is a standard form of agreement between a single purpose entity (“the SPE”) and a project owner, called the owner member. C196–2008 is intended for use on a project where the project participants have formed the SPE utilizing AIA Document C195™–2008, Standard Form of Single Purpose Entity Agreement for Integrated Project Delivery. C196–2008 is coordinated with C195–2008 in order to implement the principles of integrated project delivery, including the accomplishment of mutually-agreed goals. C196–2008 provides the terms under which the owner member will fund the SPE in exchange for the design and construction of the project. The SPE provides for the design and construction of the project through separate agreements with other members, including an architect and construction manager, utilizing AIA Document C197™–2008, Standard Form of Agreement Between Single Purpose Entity and Non-Owner Member for Integrated Project Delivery. The SPE may also enter into agreements with non-member design consultants, specialty trade contractors, vendors and suppliers.
$20.99 $24.99
C197/2008 Standard Form of Agreement Between Single Purpose Entity and Non-Owner Member for Integrated Project Delivery (2008)
AIA Document C197–2008 is a standard form of agreement between a single purpose entity (“the SPE”) and members of the SPE that do not own the project, called non-owner members. C197–2008 is intended for use on a project where the parties have formed the SPE utilizing AIA Document C195™–2008, Standard Form of Single Purpose Entity Agreement for Integrated Project Delivery. C197–2008 is coordinated with C195–2008 in order to implement the principles of integrated project delivery, including the accomplishment of mutually-agreed goals. All members of the SPE, other than the project owner, will execute C197–2008. C197–2008 provides the terms under which the non-owner members provide services to the SPE to complete the design and construction of the project. The specific services the non-owner members are required to perform are set forth in the Integrated Scope of Services Matrix, which is part of the C195–2008 Target Cost Amendment and is incorporated into the executed C197–2008. In exchange for the non-owner members’ services, the non-owner members are paid the direct and indirect costs they incur in providing services. Additionally, C197–2008 allows for the non-owner members to receive profit through Incentive Compensation and Goal Achievement Compensation.
$20.99 $24.99
C198/2010 Standard Form of Agreement Between Single Purpose Entity and Consultant for Integrated Project Delivery
AIA Document C198™–2010 is a standard form of agreement between a single purpose entity (“the SPE”) and a consultant. AIA Document C198–2010 is intended for use on a project where the parties have formed the SPE utilizing AIA Document C195™–2008, Standard Form Single Purpose Entity Agreement for Integrated Project Delivery. C198–2010 is coordinated with C195–2008 in order to implement the principles of integrated project delivery. The specific services the consultant is required to perform are set forth within the document as well as the Integrated Scope of Services Matrix, which is part of the C195–2008 Target Cost Amendment. In addition to traditional compensation for services, C198–2010 allows for the consultant to receive additional profit through incentive compensation and goal achievement compensation.
$20.99 $24.99
C199/2010 Standard Form of Agreement Between Single Purpose Entity and Contractor for Integrated Project Delivery
AIA Document C199™–2010 is a standard form of agreement between a single purpose entity (“the SPE”) and a contractor. AIA Document C199–2010 is intended for use on a project where the parties have formed the SPE utilizing AIA Document C195™–2008, Standard Form Single Purpose Entity Agreement for Integrated Project Delivery. C199–2010 is intended to be a flexible document. C199 can be used for a contractor that only provides construction services, or it can also be used for a contractor that will provide both pre-construction and construction services. C199 is not intended for use in competitive bidding and relies upon an agreed to contract sum, which can be either a stipulated sum (fixed price) or cost of the work plus a fee, with a guaranteed maximum price. In addition to compensation for the contract sum, C199 allows for the contractor to receive additional profit through incentive compensation and goal achievement compensation.
$20.99 $24.99
C401/2007 Architect & Consultant Agreement (2007) REPLACES C141
Agreement between the architect and the consultant providing services to the architect. C401–2007 is suitable for use with all types of consultants, including consulting architects. This document may be used with a variety of compensation methods. C401–2007assumes and incorporates by reference a preexisting owner-architect agreement known as the Prime Agreement. B101™–2007, B103™–2007, B104™–2007, B105™-2007 and B152™–2007 are the documents most frequently used to establish the Prime Agreement. C401–2007 was modified in 2007 to be shorter and more flexible by “flowing down” the provisions of the Prime Agreement, except as specifically stated in C401–2007.
$20.99 $24.99
C441/2007 Standard Form of Agreement Between Architect and Consultant for a Design-Build Project
AIA Document C441™–2008 establishes the contractual relationship between the architect and a consultant providing services to the architect on a design-build project. AIA Document C441–2008 is suitable for use with all types of consultants, including consulting architects and may be used with a variety of compensation methods. C441 assumes and incorporates by reference a preexisting prime agreement between design-builder and architect. C441–2008 was written to ensure consistency with AIA Document B143™–2004, Standard Form of Agreement Between Design-Builder and Architect, and with other documents in the AIA 2004 Design-Build family of documents.
$15.99 $19.99
C727/1992 Architect-Consultant Special Services (1992)
Standard agreement between architect and consultant for special services for use when other C Series documents are inappropriate. This document is for planning, feasibility and post-occupancy studies and services requiring specialized descriptions.
$15.99 $19.99
Share and Enjoy:
  • Print
  • Digg
  • del.icio.us
  • Facebook
  • Google Bookmarks
  • email
  • LinkedIn
  • MySpace
  • PDF
  • Reddit
  • RSS
  • Twitter

AIA Arizona


AIA Phoenix Metro
30 N 3rd Ave, Suite 200, Phoenix, AZ 85003
p: 602.252.4200
f: 602.273.6814
View Map

AIA Grand Canyon
30 N 3rd Ave, Suite 200, Phoenix, AZ 85003
p: 800.367.2781
f: 602.273.6814
View Map

AIA Southern Arizona
30 N 3rd Ave, Suite 200, Phoenix, AZ 85003
p: 602.252.4200
f: 602.273.6814
View Map